Surface Spring Supports Table

Enter or modify surface spring stiffness data in a spreadsheet format Table.

Table Tool in midas CIVIL is powerful and contains a large variety of built-in functions. Refer to the following items for detail directions:
 

Usage of Table Tool

Terminology

Familiarize with Usage

Basic directions (Cell motion, selection, size control, etc.)

Data manipulation (Add, delete, modify data, etc.)

Copy/Paste data using clipboard

Supplementary Table functions

Table Sorting

Table format setting

Auto-fit column width

Graph printing

Supplementary functions by Table types

Node/Element Table

Results Table

From the Main Menu select Boundary > Tables > Boundary Tables > Surface Spring Support Table.

Element: Element number

Type: The type of element

Distributed Type: The type of distribution of surface spring supports

Local Axis : Displays the direction of defined elements for the case of frame type.

Face: Display element numbers that the distributed surface spring supports are applied to.

Edge: Display edge numbers that the distributed surface spring supports as a planer (edge) type are applied to.

Width : Indicate selected width that is set to calculate the supporting stiffness of beam element per unit length.

Spring Type: Select the type of spring  (Linear / Compression only / Tension only).

Modulus of Subgrade Reaction : Define the modulus of subgrade reaction.

Group : Indicate the boundary group of each element.