Define Point Grid

 

 

Assign the spacings and display area of point grids.

Point grids are displayed according to the initial preferences setting in Environment View of Tools > Preference. Use the function to change the preferences temporarily.

Point grids are displayed in the UCS x-y plane. Use View > Grids to display or not to display the point grids. Use the function in conjunction with Point Grid Snap for convenience.

 

 

 

From the Main Menu select Structure > UCS/Plan > Point Grid.

 

 

 

 Grid Spaces

dx, dy
Point grid spacings in the UCS x, y-directions
Enter only dx if dx and dy are equal.

 Model Boundary

Enter the grid boundary if the point grids are to be displayed only in a particular range. Check Apply To Grid Boundary.

Enter Xmin, Ymin, Xmax and Ymax consecutively.

Observe the following examples:

      • Enter only '20'

Xmin = 0, Ymin = 0, Xmax =20, Ymax =20

      • Enter '20, 30'

Xmin = 0, Ymin = 0, Xmax = 20, Ymax = 30

      • Enter '10, 15, 20, 30'

Xmin = 10, Ymin = 15, Xmax = 20, Ymax = 30