User Define |
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
The user directly defines the time dependent material properties (creep, shrinkage and relaxation) of concrete. The properties are applied to Construction stage analysis and Heat of hydration analysis. Select "User Defined" as the Code in the Add/Modify Time Dependent Material (Creep/Shrinkage) dialog box and select the Creep Function and Shrinkage Strain Function defined here. Select User Defined as the Relaxation Coefficient in the Tendon Property dialog box and select the Relaxation Function defined here. |
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
From the Main Menu select Properties > Time Dependent > User Define. |
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
|
||||||||||||||||||||||||||||||||||||||||||||||||
Click under the tab being considered for data entry. Click to check or change or click to delete the entered data. Click to copy previously entered data. Creep tab Define the time dependent creep property of concrete material. Function Name: Enter the name of Creep Function, which is referred to in the Add/Modify Time Dependent Material (Creep/ Shrinkage) dialog box if User Defined is selected in the Code field. Creep Function Data Type Specific Creep: Strain per unit stress excluding immediate deformation Creep Function: Strain per unit stress including immediate deformation Creep Coefficient: Ratio of creep strain to elastic strain ( ) Elasticity midas Civil uses Specific Creep for creep analysis. For more details, refer to Time Dependent Analysis Features > Time Dependent Material Properties in the "Analysis Manual"
Scale Factor: Multiplier for values Graph Options: Check on for Log Scale graph Description: Descriptive text for the Function Shrinkage Strain tab Define the shrinkage strain, which is a function of time. Function Name: Enter the name of the function defining the change of creep strains, which is referred to in Shrinkage Strain Function of Add/Modify Time Dependent Material (Creep/ Shrinkage) dialog box when the Code is User Defined. : A frequently used Shrinkage Strain Function may be saved in and recalled from a file, whose type is fn.TDM as for the Creep tab. Scale Factor: Multiplier for values Graph Options: Check on for Log Scale graph Description: Descriptive text for the Function Note 1. If you have many elements in the Construction Stages with different activation age, then you must defined several creep functions with different loading ages. 2. If the loading age ( activation age of the element ) doesn’t match with any of the curve then an interpolation is done between two loading ages just more and less than the specified loading age. Relaxation tab
Define the time dependent relaxation rate of prestressing tendon. The relaxation rate is based on the initial jacking force defined in Tendon Prestress Load. For the long-term relaxation loss, the program assumes the relaxation is constant after the final relaxation rate defined by the user.
Function Name: Enter the name of Relaxation Function, which is referred to in the Tendon Property dialog box if User Defined is selected in the Relaxation Coefficient field.
Option for Relaxation Time
Hour / Day
A frequently used Relaxation Function may be saved in and recalled from a file. The data file, fn.TDM retains the following form:
Scale Factor: Multiplier for values Graph Options: Check on for Log Scale graph Description: Descriptive text for the Function |
||||||||||||||||||||||||||||||||||||||||||||||||
|