Load Cases for Pre-Composite Section
Enter the load cases applicable prior to becoming composite sections. The analysis reflects the variation of sectional properties before and after composite actions in bridge structures. Observe the following steps:
1. Create the load cases that non-composite sections will have to resist in Load>Static Load Cases.
2. Define the load cases that non-composite Bridge will have to resist in Load>Composite Section Analysis Data>Load Cases for Pre-Composite Section.
3. Perform the analysis in the Analysis>Perform Analysis menu or click the icon .jpg){kind=small}
Perform Analysis.
4. Once the analysis is successfully completed, analyze the analysis results through various post-processing functions in the Results menu using the load cases or combinations.
From the Main Menu select Load > Settlement/Etc. > Etc. > Pre-Composite Section.
Select the load cases to be used prior to composite action. Select load cases and click 
.
Click .jpg){kind=small}
when all the entered data are to be deleted.