Heat Source Functions
|
|
|
Define heat source of concrete to model the amount of heat generated during hydration. |
|
|
|
From the Main Menu select Load > Heat of Hydration > Heat of Hydration Analysis Data > Heat Source Functions. |
|
|
Function Name: Enter the name of the heat source function. Heat Source: Define the constant heat source over time.
Adiabatic temperature rise defined by Code is used. The factors affecting the adiabatic temperature rise are defined. Function Name : Enter the name of the heat source function Function Maximize adiabatic temp. rise (K) : varies with Code Reactive velocity coefficient (a) : varies with Code Use Concrete Data : Calculate Maximum adiabatic temperature rise and reactive velocity coefficient based on the concrete information. Cement type : Select cement type Temperature : Specify concrete pour temperature. Cement Content : Specify the amount of cement content per unit volume.
The user can directly define the heat source function by selecting User Type. The heat source function can be inputted in a table format for two cases - either Heat Source or Temperature.
|
|