Deformation
|
|
|
Check the deformations of inelastic hinges (Lumped, Distributed, Spring, and Truss Type) resulting from the time history analysis with the time step, in a spreadsheet format table. Table Tool in midas Civil offers a variety of powerful built-in functions. Refer to Usage of Table Tool for detail directions: |
|
|
|
From the Main Menu select Results > Result Tables > Inelastic Hinges > Deformation |
|
|
Upon executing the Inelastic Hinge > Deformation Table function, Records Activation Dialog prompts. Click Note Deformation Table (Lumped, Distributed) Elem: Element number
Hinge Location: Locations where inelastic hinges are assigned. For Lumped Type, it displays as i, j, i & j, FX. For Distributed Type, it displays according to the number of hinges.
Inelastic Hinge Prop.: Inelastic hinge property number
Load: Time history load case
Deformation: Maximum deformation till the analysis time elapses
Time: Time at which the maximum deformation occurs
Deformation Table (Truss)
Elem: Element number
Inelastic Hinge Prop.: Inelastic hinge property number
Load: Time history load case
Deformation: Maximum deformation till the analysis time elapses
Time: Time at which the maximum deformation occurs
Deformation Table (Spring) General Link
No: General spring element number
Prop: Property number of general spring element
Node1: Node i number of spring
Node2: Node j number of spring
Inelastic Hinge Prop.: Inelastic hinge property number
Load: Time history load case
Deformation: Maximum deformation till the analysis time elapses
Time: Time at which the maximum deformation occur. |
|