Transverse Stiffener of Section
|
|
|
Enter the spacings of transversal stiffeners for steel sections. This function is available when design code is specified as "Eurocode3-2:05". |
|
|
|
From the Main Menu select Design > Steel Design > Transverse Stiffener of Box Section. |
|
|
New for Civil 2013 Select a section from the Section List to enter transfer stiffeners. All section have the same stiffener: Check on to enter the identical stiffener spacing for i-end, middle, and j-end of a member. i-NodePitch: Spacing of Rigid transverse stiffener at i-end of a member. When "All section have the same stiffener" option is toggled on, the entered pitch will be applied to i-end, middle, and j-end. middlePitch: Spacing of Rigid transverse stiffener at middle of a member. It is activated when "All Section have the same stiffener" option is toggled off. j-NodePitch: Spacing of Rigid transverse stiffener at j-end of a member. It is activated when "All Section have the same stiffener" option is toggled off.
|
|
Revision of Civil 2014 (v2.1) Q1. How does the presence of transverse stiffener affect the design? It affects which formula? |
|