Pushover Increment Functions
Add, modify or delete the increment control function to apply to the Stepping Control Option in the Pushover Load Cases.
From the Main Menu select Pushover > Load Case > Pushover Increment Function.
■ Enter new or additional increment control function
Click 
.
■ Modify previously entered increment control function
Select the relevant increment control function from the increment control function list of the dialog box and click
.
■ When deleting previously entered increment control function
Select the relevant increment control function from the increment control function list of the dialog box and click 
.
Click or to display the dialog box below and enter the required data in the relevant entry fields.
Import CSV File...
Enter the Increment Control Function by reading previously created files. The data are saved as '.csv' extension.
User Input
The user directly enters the Increment Control Function.
Note
Although the value of 'Increment Steps (nstep)' entered in the Pushover Load Cases dialog is changed, the user does not need to change the Increment Control Function since it is automatically applied according to specified Increment Steps (nstep).
For example, if the user enters the Increment Control Function as the table below and Increment Step (nstep) is specified as 10,
or 
applied the Increment Control Function is as the table below.
