Flexural Strength Data |
|
|
Displays the critical condition of the flexure strength as per the Strength Limit State of Bridge Load Rating Design. |
|
|
|
From the Main Menu select Design > Bridge Rating Design > Rating Design > Rating Design Result Tables > Flexural Strength Data. |
|
|
Flexural Strength Data Group:User Specified element group name. Elem.:Designed element. Part:The Location of the member [node or node]. Rating Case:The design condition that will generate corresponding member results. Rating Factor: Minimum Rating Factor. Mn: Flexural Resistance. DC Factor: The DC load case factor inputted in Bridge Load Rating Setting. Force (tonf-m):The moment about the primary axis due to DC load case. DW Factor:The DW load case factor inputted in Bridge Load Rating Setting. Force (tonf-m):The moment about the primary axis due to DW load case. Temperature Factor:The Temperature load case factor inputted in Bridge Load Rating Setting. Force (tonf-m): The moment about the primary axis due to Temperature load case Permanent Factor:The Permanent load case factor inputted in Bridge Load Rating Setting. Force (tonf-m):The moment about the primary axis due to Permanent load case. Secondary Factor:The Secondary load case factor inputted in Bridge Load Rating Setting. Force (tonf-m): The moment about the primary axis due to Secondary load case. User Defined Factor:The User Defined load case factor inputted in Bridge Load Rating Setting. Force (tonf-m):The moment about the primary axis due to User Defined load case. Pri.LL Factor: The Primary Live Load factor inputted in Bridge Load Rating Setting. Force (tonf-m):The moment about the primary axis due to Primary Live Load. Adj.LL Factor:The Adjacent Live Load factor inputted in Bridge Load Rating Setting. Force (tonfm):The moment about the primary axis due to Adjacent Live Load. Note If the result does not satisfy the standard specification of design, then it is displayed in red. |
|