Shear Strength Data

Displays the Bridge Load Rating Design results of all the Rating Cases due to shear strength as per the Strength Limit State.

From the Main Menu select Design > Bridge Rating Design > Rating Design > Rating Design Result Tables > Shear Strength Data.

Shear Strength Data

Group: User Specified element group name.

Elem.: Designed element.

Part: The Location of the member  [node or node].

Rating Case: The design condition that will generate corresponding member results.

Rating Factor: The strength reduction factor of the corresponding member for each load case.

Vn: Shear Resistance.

DC

Factor: The DC load case factor of inputted in Bridge Load Rating Setting.

Force(tonfm):The shear strength due to DC load case.

DW

Factor:The DW load case factor inputted in Bridge Load Rating Setting.

Force(tonfm):The shear strength due to DW load case.

Temperature

Factor:The Temperature load case factor inputted in Bridge Load Rating Setting.

Force(tonfm): The shear strength due to Temperature Load Case.

Permanent

Factor:The Permanent load case factor inputted in Bridge Load Rating Setting.

Force(tonfm): The shear strength due to Permanent load case.

Secondary

Factor:The Secondary load case factor inputted in Bridge Load Rating Setting

Force(tonfm):The shear strength due to Secondary load case.

User Defined

Factor: The User Defined load case factor inputted in Bridge Load Rating Setting.

Force(tonfm):The shear strength due to User Defined load case.

Pri.LL

Factor: The Primary Live Load factor inputted in Bridge Load Rating Setting.

Force(tonfm):The shear strength due to Primary Live Load.

Adj.LL

Factor:The Adjacent Live Load factor inputted in Bridge Load Rating Setting.

Force(tonfm):The shear strength due to Adjacent Live Load.

Note

If the result does not satisfy the standard specification of design, then it is displayed in red.