PSC Design material

Display the steel rebar and concrete material properties entered during the creation of the analysis model. Select the material to be modified or changed.

Concrete Material Selection

Display the selected material properties and modify/change the material property data.

The material property data can be changed by using the material property database built-in the program or by directly entering the changed data.

Procedure for using the material property database
Select the relevant code and the material name with the mouse.

The reinforcing steel bar standards are specified similar to the concrete standards and may be changed by the user if necessary. That is, the concrete and rebar standards need not be the same.

Direct entry by the user
Select 'None' in the Code field and enter the name of the material to be used in the Name field. Then, each data field is activated and the following material property data can be entered :

Specified Compressive Strength (f'c/fck): Design compressive cylinder strength of concrete

Rebar Selection (refer to Note 3)

Note 1
If any of NAME, Ec, f'c, and Grade of the Main Rebar and Grade of the Sub-Rebar material property data is omitted in the analysis model, the following values are used:

(1) ASTM(RC)

NAME	= Grade C4000 (4000 lb/in2)
Grade of Main Rebar	= Grade 60 (Fy=60000 lb/in2)
Grade of Sub Rebar	= Grade 60 (Fy=60000 lb/in2)
Wc	= 150 lb/ft3.
Ec(lb/in2, for analysis)	= 33 X Wc1.5 X f'c0.5
Es	= 2.9 X 107 lb/in2

(2) CSA(RC)

NAME	= C30 ( 30 N/mm2) <- Strength of Cubic (Fcu).
Grade of Main Rebar	= 400R (Fy=400 N/mm2)
Wc	= 2300 kg/m3
Ec(N/mm2, for analysis)	= (3300 X f'c0.5 + 6900) X (Wc / 2300)1.5
Es	= 2.00 X 105 N/mm2

(3) BS(RC)

NAME	= C30 ( 30 N/mm2) <- Strength of Cubic (Fcu).
Grade of Main Rebar	= SD460 (Fy=460 N/mm2)
Grade of Sub Rebar	= SD460 (Fy=460 N/mm2)
Ec(N/mm2, for analysis)	= (Fcu/5 + 20.0) X 103
Es	= 2.00 X 105 N/mm2

(4) EN(RC)

NAME	= C25/30 ( 25 N/mm2)
Grade of Main Rebar	= SD400 (Fy=400 N/mm2)
Grade of Sub Rebar	= SD400 (Fy=400 N/mm2)
Ec(N/mm2, for analysis)	= 9.5 X (Fc+8.0)(1/3) X 103
Es	= 2.00 X 105 N/mm2

(5) IS (RC)

NAME	= M25 ( 25 N/mm^2)
Grade of Main Rebar	= Fe415 (415 N/mm^2)
Grade of Sub Rebar	= Fe415 (415 N/mm^2)
Wc	= 2.5 tonf/m3
Ec (N/mm2, for analysis)	= (3300f'c^0.5 + 6900) (Wc/2300)^1.5
Es	= 2.00*10^5 N/mm^2

(6) CNS (RC)

NAME	= C240 ( 240 kgf/cm^2)
Grade of Main Rebar	= SD42 (4200 kgf/cm^2)
Grade of Sub Rebar	= SD42 (4200 kgf/cm^2)
Ec (N/mm2, for analysis)	= 4270 * Wc^1.5 * fc'^0.5
Es	= 2.04*10^6 kgf/cm^2

(7) UNI(RC)

NAME	= Rck30 ( 30 N/mm^2)
Grade of Main Rebar	= FeB44k (430 N/mm^2)
Grade of Sub Rebar	= FeB44k (430 N/mm^2)
Ec(lb/in2, for analysis)	= 5700 * (fck)^(1/2)
Es	= 2.06*10^5 N/mm^2

(8) JIS(RC)

NAME	= Fc24 ( 24 N/mm2)
Grade of Main Rebar	= SD390 (Fy=390 N/mm2)
Grade of Sub Rebar	= SD390 (Fy=390 N/mm2)
Wc	= 23.0 kN/m3 (If Fc <= 36 N/mm2)
	= 23.5 kN/m3 (If Fc <= 48 N/mm2)
	= 24.0 kN/m3 (If Fc <= 60 N/mm2)
Ec(lb/in2, for analysis)	= 3.35 X 104 X (Wc/24)1.5 X (Fc/60)(1/3)
Es	= 2.05 X 105 N/mm2

(9) JTG04(RC)

NAME	= 25 ( 25 N/mm^2)
Grade of Main Rebar	= HRB335 (335 N/mm^2)
Grade of Sub Rebar	= HRB335 (335 N/mm^2)
Ec(N/mm^2, for analysis)	= C15 = 2.2010^4 C20 = 2.5510^4 C25 = 2.8010^4 C30 = 3.0010^4 C35 = 3.1510^4 C40 = 3.2510^4 C45 = 3.3510^4 C50 = 3.4510^4 C55 = 3.5510^4 C60 = 3.6010^4 C65 = 3.6510^4 C70 = 3.7010^4 C75 = 3.7510^4 C80 = 3.8010^4
Es	= 2.1010^5 N/mm^2 (R235) = 2.0010^5 N/mm^2 (Other Series)

(10) GB(RC)

NAME	= C25 ( 25 N/mm2)
Grade of Main Rebar	= HRB400 (Fy=400 N/mm2)
Ec(N/mm2, for analysis)	= 105 / (2.2 + 34.7 / Fcu)
Es	= 2.00 X 105 N/mm2

(11) GB-Civil(RC)

NAME	= C25 ( 25 N/mm2)
Grade of Main Rebar	= Grade 2 (Fy=400 N/mm2)
Ec(N/mm2, for analysis)	= 105 / (2.2 + 33.0 / Fcu)
Es	= 2.10 X 105 N/mm2
Other Series	= 2.00 X 105 N/mm2

(12) KS01-Civil(RC)

NAME	= C24 ( 24 N/mm^2)
Grade of Main Rebar	= SD400 (400 N/mm^2)
Grade of Sub Rebar	= SD400 (400 N/mm^2)
Wc	= 2500 kgf/m3 (for self-weight) =2500 kgf/m3. (for Ec for analysis)
Ec (kgf/cm2, for analysis)	= 0.043 * Wc1.5 * fck0.5 (If fck <= 300 kgf/cm2) =0.030 * Wc1.5 * fck0.5 + 7700 (If fck > 300 kgf/cm2)
Es	= 2.0*10^5 N/mm^2

(13) KS01(RC)

NAME	= C24 ( 24 N/mm^2)
Grade of Main Rebar	= SD400 (400 N/mm^2)
Grade of Sub Rebar	= SD400 (400 N/mm^2)
Wc	= 2400 kgf/m3 (for self-weight) =2300 kgf/m3. (for Ec for analysis)
Ec (kgf/cm2, for analysis)	= 0.043 * Wc1.5 * fck0.5 (If fck <= 300 kgf/cm2) =0.030 * Wc1.5 * fck0.5 + 7700 (If fck > 300 kgf/cm2)
Es	= 2.0*10^5 N/mm^2

(14) KS (RC)

NAME	= C240 ( 240 kgf/cm2)
Grade of Main Rebar	= SD400 (4000 kgf/cm2)
Grade of Sub Rebar	= SD400 (4000 kgf/cm2)
Wc	=2.4 tonf/m3
Ec (lb/in2, for analysis)	= 4270 X Wc1.5 X fck0.5 (If fck <= 300 kgf/cm2) =3000 X Wc1.5 X fck0.5 + 70000 (If fck > 300 kgf/cm2)
Es	= 2.1X106 kgf/cm2

(15) KS- Civil (RC)

NAME	= C240 ( 240 kgf/cm2)
Grade of Main Rebar	= SD400 (4000 kgf/cm2)
Grade of Sub Rebar	= SD400 (4000 kgf/cm2)
Wc	=2.4 tonf/m3
Ec (lb/in2, for analysis)	= 4270 X Wc1.5 X fck0.5 (If fck <= 300 kgf/cm2) =3000 X Wc1.5 X fck0.5 + 70000 (If fck > 300 kgf/cm2)
Es	= 2.1X106 kgf/cm2

Note 2
The concrete standards are classified into None, ASTM(RC), CSA(RC), BS(RC), EN(RC), NTC(RC), UNI(RC), GOST(RC), JIS(RC), GB(RC), GB-Civil(RC), KS(RC), KS-Civil(RC), IS(RC), etc...

(1) AASHTO-LRFD02	= 57000 * fc'1/2 lb/in^2
(2) AASHTO-LFD96	= 1820*fc'1/2 kip/in^2
(3) ACI 318-02	= 57000 X f'c0.5 lb/in2
(4) CSA-S6-00	= 57000 X fc'1/2 lb/in2
(5) JTJ023-85	= 1.4 X 105 kgf/cm2 (If Fc <= 300 kgf/cm2)
	= 10500 X Fc1/2 + 70000 kgf/cm2 (If Fc > 300 kgf/cm2)
(6) IRC-21-2000	M15 = 26.0 GPa M20 = 27.5 GPa M25 = 29.0 GPa M30 = 30.5 GPa M35 = 31.5 GPa M40 = 32.5 GPa M45 = 33.5 GPa M50 = 35.0 GPa M55 = 36.0 GPa M60 = 37.0 GPa
(7) TWN-BRG-LSD90	= 15100 * fc'1/2kgf/cm^2
(8) KSCE-USD96	= 15000 X fc0.5 kgf/cm2 (If fc <= 300 kgf/cm2) = 10500 X fc0.5 + 70000 kgf/cm. (If fc > 300 kgf/cm2)
(9) KCI-USD99	= 15000 X fc0.5 kgf/cm2 (If fc <= 300 kgf/cm2)
	= 10500 X fc0.5 + 70000 kgf/cm2 (If fc > 300 kgf/cm2)

Note 4
If "None" is specified in the Code, the program applies the user-defined material properties to carry out the design.

PSC Design Material

Material List

Concrete Material Selection

Rebar Selection (refer to Note 3)