Rebar-Perimeter Pattern

Place the rebars around the outer perimeter with a concrete cover defined by the user.

From the Main Menu select Model > Rebar > Rebar-Perimeter Pattern.

Right Click    and Select Add  under the Section > Main Reinforcement in the Works Tree.

Click    Perimeter Pattern in the Icon Menu.

Rebar-Perimeter Pattern

  Rebar Material

The material defined by the user in Model>Rebar>Rebar Material Property is assigned to all the rebars.

Rebar Pattern

Name of the pattern.

Rebar Dia

Select the rebar diameter from the drop down list. The rebar set is as per the country code specified in Model>Rebar>Rebar Material Property.

 Distance between concrete face to center of rebar

Enter the concrete cover i.e. the distance between concrete face to center of the rebar.

 No. of Rebars

Enter the total number of rebars.

Note1

First of all the rebars are placed at the corners of the section, Rest of the rebars are equally distributed through out the outer perimeter of the section.  

Note2

The preview is shown in the work window before applying.