Rebar-Rectangular Pattern

Place the rebars on a rectangle drawn by the user in the work-window.

From the Main Menu select Model > Rebar > Rebar-Rectangular Pattern.

Right Click    and Select Add  under the Section > Main Reinforcement in the Works Tree.

Click    Rectangular Pattern in the Icon Menu.

Rebar-Rectangular Pattern

  Rebar Material

The material defined by the user in Model>Rebar>Rebar Material Property is assigned to all the rebars.

Rebar Pattern

Name of the pattern.

Rebar Dia

Select the rebar diameter from the drop down list. The rebar set is as per the country code specified in Model>Rebar>Rebar Material Property.

Corner 1

Enter the coordinates of one corner of the rectangle.

Corner 2

Enter the coordinates of opposite corner of the rectangle.

  No. of Interior Rebars on Top & Bot

Enter the number of rebars in the interior of Top and Bottom edges of the rectangle i.e. excluding the rebars at the corners of the rectangle.

No. of Interior Rebars on Left & Right

Enter the number of rebars in the interior of Left and Right edges of the rectangle i.e. excluding the rebars at the corners of the rectangle.

Rotate Angle

Rotate the whole set of rebars at the specified angle about X axis in clockwise direction.

Note

The preview is shown in the model view before applying.