Revision of Ver.7.4.1

Thickness Table

Enter or modify thickness data of planar elements (Plane Stress Element, Plate Element) in a spreadsheet format Table.

Table Tool in MIDAS/Gen offers a variety of powerful built-in functions. Refer to the following items for detail directions:

 

Usage of Table Tool

Terminology

Familiarize with Usage

Basic directions (Cell motion, selection, size control, etc.)

Data manipulation (Add, delete, modify data, etc.)

Copy/Paste data using clipboard

Supplementary Table functions

Table Sorting

Table format setting

Auto-fit column width

Graph printing

Supplementary functions by Table types

Node/Element Table

Results Table

From the Main Menu select Model > Properties > Thickness Table.

Select Tables > Structure Tables > Property > Thickness in the Tables tab of the Tree Menu.

Shortcut key : [Ctrl]+[Alt]+T

Refer to Usage of Table Tool and enter or modify the following data:

 

ID: Thickness type number

Type: Unstiffened or Stiffened plate type

In = Out: Enter 'Yes' when the in-plane and out-of-plane stiffness are based on the same thickness

Thick - In: Thickness for in-plane stiffness calculation

Thick - Out: Thickness for out-of-plane stiffness calculation

Revision of Ver.7.4.1

Offset : Offset of a plate section

Offset  Type : Offset type (Ratio/ Value)

Offset  Ratio : Ratio of the offset distance to the plate thickness

Offset  Value : Offset distance entered by the user directly