Load Cases/Combinations

Select the desired load case, load combination or envelope.

Click to the right to enter, add or modify load combinations (refer to Load Cases/Combinations).

Components

Select the desired component of the design results from the following:

Axial: Axial stress ratio (strength ratio) component

Shear-y: Shear stress ratio (strength ratio) component in the direction of the strong axis

Shear-z: Shear stress ratio (strength ratio) component in the direction of the weak axis

Bend-y: Bending stress ratio (strength ratio) component due to moment about the strong axis

Bend-z: Bending stress ratio (strength ratio) component due to moment about the weak axis

Combined: Maximum combined stress ratio (strength ratio) component

Contour

Display the design results by contours.

Ranges: Assign the contour ranges.

: Assign the coloring ranges for contour lines. The user may assign specific colors for specific ranges.

Note
Contour Range Max/Min values can be larger than the max/min output values.  If the Contour Range values exceed the output values, they are entered at Rank 0 and Rank 11.

Number of Colors: Assign the number of colors for the contour (select among 6, 12, 18 & 24 colors)
 

Gradient Fill: Display the color gradient (shading) in the contour.
 

Draw Contour Lines: Display the contour lines by colors.
 

Colors: Assign or alter the colors of the contour.

Color Tables: Assign the type of Colors.

: Control the color of each range in the contour.

Reverse Contour: Check on to reverse the sequence of color variation in the contour.

Contour Line: Assign the color for contour boundaries.

Element Edge: Assign the color of element edges to appear in the contour.

Legend

Organize and display various references related to analysis results either to the right or left of the working window.

Legend Position: Select the position of the legend in the output window

New for Ver.6.0.0

Rank Value Type: Specify a type of values in the Legend and the number of decimal points.

Values

Display the selected design result components by means of numerical values.
The font and color of the numbers can be controlled in Display Option.

Note

When checking the Design Result on the screen, if the design result exceeds the limit value, the text is marked in red color.

Decimal Points: Specify decimal points of the displayed numbers

Exp.: Option to express numerical values in exponents
 

Min & Max: Display the minimum and maximum values

Abs Max: Display the absolute maximum value

Max: Display only the maximum value

Min: Display only the minimum value
 

Limit Scale(%): Set the screen limits for displaying design results relative to the maximum or minimum value

Note
The default Decimal Points can be controlled in "Preferences".