Click to the right of
Scale Nodes : Display the Node
Table
Start Node Number
Not applicable for this command.
Scale Factors
Enter the scale factors for each direction.
sfx:
Scale factor for the x-direction
sfy:Scale
factor for the y-direction
sfz:
Scale factor for the z-direction
Scale About
Assign a reference point of magnification
or reduction.
UCS Origin:
UCS origin point
GCS Origin:
GCS origin point
Average:
Average of the coordinates of the relevant nodes in each direction
Center:
Arithmetic mean of the maximum and minimum coordinates among the targeted
nodes
User: Enter the coordinates of a reference point
Selection Type
All:
Apply to all the entered nodes
By Selection:
Apply only to the selected nodes |