Beam End Release Table

Enter or modify beam end release data in a spreadsheet format Table.

Table Tool in midas offers a variety of powerful built-in functions. Refer to the following items for detail directions:
 

Usage of Table Tool

Terminology

Familiarize with Usage

Basic directions (Cell motion, selection, size control, etc.)

Data manipulation (Add, delete, modify data, etc.)

Copy/Paste data using clipboard

Supplementary Table functions

Table Sorting

Table format setting

Auto-fit column width

Graph printing

Supplementary functions by Table types

Node/Element Table

Results Table

From the Main Menu select Model > Boundaries > Beam End Release Table.

Select Structure Tables > Boundaries > Beam End Release Table in the Tables tab of the Tree Menu.

Shortcut key : [Ctrl]+[Shift]+D

 (Refer to "Beam End Release")

Refer to Usage of Table Tool and enter or modify the following data:

Element: Beam element number

Type: Type of Partial Fixity (Relative, Value)

Flag-I: Release condition for the i-end (N1) of the beam element

Fx: Assign 1' to release or provide Partial Fixity to the element's local x-direction stiffness

Fy: Assign 1' to release or provide Partial Fixity to the element's local y-direction stiffness

Fz: Assign 1' to release or provide Partial Fixity to the element's local z-direction stiffness

Mx: Assign 1' to release or provide Partial Fixity to the torsional stiffness about the element's local x-axis

My: Assign 1' to release or provide Partial Fixity to the bending stiffness about the element's local y-axis

Mz: Assign 1' to release or provide Partial Fixity to the bending stiffness about the element's local z-axis

Fxi: Enter a Partial Fixity ratio if necessary for the axial stiffness at i-end

Fyi: Enter a Partial Fixity ratio if necessary for the shear stiffness in the element's local y-direction at i-end

Fzi: Enter a Partial Fixity ratio if necessary for the shear stiffness in the element's local z-direction at i-end

Mxi: Enter a Partial Fixity ratio if necessary for the torsioanl stiffness about the element's local x-axis at i-end

Myi: Enter a Partial Fixity ratio if necessary for the bending stiffness about the element's local y-axis at i-end

Mzi: Enter a Partial Fixity ratio if necessary for the bending stiffness about the element's local z-axis at i-end

Flag-J: Release condition of the j-end (N2) of beam element

Fx: Assign 1' to release or provide Partial Fixity to the element's local x-direction stiffness

Fy: Assign 1' to release or provide Partial Fixity to the element's local y-direction stiffness

Fz: Assign 1' to release or provide Partial Fixity to the element's local z-direction stiffness

Mx: Assign 1' to release or provide Partial Fixity to the torsional stiffness about the element's local x-axis

My: Assign 1' to release or provide Partial Fixity to the bending stiffness about the element's local y-axis

Mz: Assign 1' to release or provide Partial Fixity to the bending stiffness about the element's local z-axis

Fxi: Enter a Partial Fixity ratio if necessary for the axial stiffness at j-end

Fyi: Enter a Partial Fixity ratio if necessary for the shear stiffness in the element's local y-direction at j-end

Fzi: Enter a Partial Fixity ratio if necessary for the shear stiffness in the element's local z-direction at j-end

Mxi: Enter a Partial Fixity ratio if necessary for the torsioanl stiffness about the element's local x-axis at j-end

Myi: Enter a Partial Fixity ratio if necessary for the bending stiffness about the element's local y-axis at j-end

Mzi: Enter a Partial Fixity ratio if necessary for the bending stiffness about the element's local z-axis at j-end

Group: Boundary Group in which the entered boundary conditions are included