From the Main Menu
select Load > Temperature
Loads > Element Temperatures.
Select Static Loads
> Temperature Loads > Element Temperatures in the Menu
tab of the Tree
Menu.
Load Case Name
Select a load case from the
load case selection field. Click to the right to prompt
the "Static
Load Cases" dialog box to add load cases or modify/delete previously
defined load cases.
Load Group Name
Select the load group, which will include
the element temperature loads. Click to the right to prompt
the "Define
Load Group" dialog box to add/modify/delete Load Group Names.
Options
Add:
new or additional element temperature
Replace:
replace previously defined element temperature
Delete:
delete previously defined element temperature
Temperature
Enter the element temperature.
Initial
It displays the entered initial temperature. Click to the
right to change the initial temperature in the "Structure Type"
dialog box.
Final Temperature:
final element temperature
Note
The temperature difference between the initial temperature and the final
element temperature is applied as
the temperature load.
Load Case Name
to the right to prompt
the "