Enter concentrated nodal loads (Concentrated Forces and Moments), or
modify or delete previously entered concentrated loads.
From the Main
Menu select Load
> Nodal Loads.
Select Static Loads
> Nodal Loads in the Menu
tab of
the
Tree Menu.
Load
Case Name
Assign the load case
name. Click to the right to enter, additional load cases
and modify or delete existing load cases.
Load
Group Name
Select the desire Load
Group that will include the entered Nodal Loads data. Select "Defualt",
if a Group assignment is unnecessary. Click to the right
to add, modify or delete Load Groups.
Options
Add:
To enter new or additional concentrated nodal loads
Replace:
To replace previously entered concentrated nodal loads
Delete:
To delete previously entered concentrated nodal loads
Nodal
Loads
Enter concentrated nodal
loads with respect to GCS.
FX:
GCS X-direction component of the concentrated load
FY:
GCS Y-direction component of the concentrated load
FZ:
GCS Z-direction component of the concentrated load
MX:
Concentrated moment component about GCS X-axis
MY:
Concentrated moment component about GCS Y-axis
MZ:
Concentrated moment component about GCS Z-axis