Beam Summary
|
|
|
|
|
|
Check hinge status of beam elements resulting at each pushover step in a spreadsheet format table.
Table Tool in MIDAS/Gen offers a variety of powerful built-in functions. Refer to the Usage of Table Tool for detailed information. |
|
|
|
|
|
|
|
From the Main Menu select Design > Pushover Analysis > Pushover Hinge Result Table > Beam Summary
Select Design Tables > Pushover Analysis > Beam Summary in the Tables tab from the Tree Menu. |
|
|
|
|
|
Upon executing the Beam Summary function,
the Records Activation Dialog is invoked. Click
1. Beam Type
Deform : Total deformation (Elastic deformation + Plastic Deformation)
D/D1 : Ratio of the total deformation to the 1st yielding deformation
D/D2 : Ratio of the total deformation to the 2nd yielding deformation
P1 : 1st yielding strength
P2 : 2nd yielding strength
D1 : 1st yielding deformation or strain
D2 : 2nd yielding deformation or strain
Note Each component (Dx, Dy, Dz, Rx, Ry & Rz) is separately displayed in each tab. For PMM type, yield moment for each step due to P-M interaction can be checked in the table.
|
|
|
after
selecting the output entities such as load cases, pushover steps, etc.