Yield Step
|
|
|
|
|
|
Check the yielding steps for all the defined hinges in a spreadsheet format table, based on the pushover analysis results.
Table Tool in MIDAS/Gen offers a variety of powerful built-in functions. Refer to the Usage of Table Tool for detailed information. |
|
|
|
|
|
|
|
From the Main Menu select Design > Pushover Analysis > Pushover Hinge Result Table > Yield Step.
Select Design Tables > Pushover Analysis > Yield Step in the Tables tab of the Tree Menu. |
|
|
|
|
|
Upon executing the Yield Step function, the
Records Activation Dialog is invoked. Click
1.Beam Type [Details...]
1st Yield : Pushover step at the first yielding point
2st Yield : Pushover step at the second yielding point 2. Wall Type [Details...]
1st Yield :Pushover step at the first yielding point
2st Yield :Pushover step at the second yielding point 3. Truss Type [Details]
1st Yield : Pushover step at the first yielding point
2st Yield : Pushover step at the second yielding point 4. Spring Type [Details]
1st Yield : Pushover step at the first yielding point
2st Yield : Pushover step at the second yielding point
|
|
|
after
selecting the output entities such as load cases, pushover steps, etc.
