Pushover Text

 

 

 

Produce text files for pushover analysis results. Maximum/minimum values may be selectively produced.

 

 

 

From the Main Menu select Design > Pushover Analysis > Pushover Text.

 

 

 

 

 

 

 

  Output Type Selection

 

Step: Total pushover analysis results with maximum/minimum values

 

Maximum & Minimum: Maximum/minimum values only

 

 

Output Step

 

Specify the step range and interval for the pushover analysis results which are to be produced.

 

 

 Node Selection

 

Select an entity for which the pushover analysis results which will be produced.

 

User Input: Enter the node numbers.

 

Selected Nodes  in View: Use the selected  nodes in the model window.

 

 

 Reference Point

 

Select a reference point for displacement when Node Result is selected.

 

Ground: Select the ground as the reference point.

 

Another Node: Select another node as the reference point.  

 

 

 Pushover Load Case

 

Select a pushover load case for the pushover analysis results which are to be produced.