Ranges:
Define the contour range.
: Assign
the color distribution range of contour. Using the function,
specific colors for specific ranges can be assigned.
Note
Contour Range Max/Min values can be larger than the max/min
output values. If the Contour Range values exceed
the output values, they are entered at Rank 0 and Rank
11.
Number
of Colors: Assign the number of colors to be included
in the contour (select among 6, 12, 18, 24 colors)
Colors:
Assign or control the colors of the contour.
Color
Table: Assign the type of Colors.
: Control
the colors by zones in the contour.
Reverse
Contour: Check on to reverse the sequence of color
variation in the contour.
Contour
Line: Assign the boundary line color of the contour
Element
Edge: Assign the color of element edges while displaying
the contour
Contour
Options: Specify options for contour representation
contour fill
Contour
Fill
Gradient
Fill: Display color gradient (shading) in the contour.
Draw Contour Lines: Display color boundaries in
the contour.
Draw
Contour Line Only
Display only the colored boundaries of the contour.
Mono
line: Display the boundaries of the contour in
a mono color.
Contour
Annotation
Legend or annotation signifying the ranges of the contour
is displayed.
Spacing
Display the spacing for the legend or annotation.
Coarse
Contour (faster)
(for large plate or solid model)
Represent a simplified contour for a large model using
plate or solid elements in order to reduce the time required
to represent a complete contour.
Extrude
Where plate elements or solid elements along a cutting
plane are represented in contour, a three dimensional
contour is created. The positive direction of the analysis
results is oriented in the z-axis direction of the local
element coordinate system.
The option is not concurrently
applicable with the Deformed Shape option. Similarly,
the option can not be concurrently applied to the cases
where Hidden option is used to display plate element thicknesses
or Both option is used to represent Top & Bottom member
forces (stresses). |