Reactions
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
Check the influence surface of a support reaction based on the influence surface analysis results due to a moving traffic load. |
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
From the Main Menu select Results > Moving Load > Influence Surfaces > Reactions. |
|||||||||||||||||
|
|||||||||||||||||
|
|||||||||||||||||
|
|
Assign the type of display.
Contour |
Display the reaction influence surface in contour. |
|
Ranges: Define the contour ranges.
Note
Number of Colors: Assign the number of colors to be included in the contour (select among 6, 12, 18, 24 colors) Colors: Assign or control the colors of the contour.
Color Table: Assign the type of Colors.
Reverse Contour: Check on to reverse the sequence of color variation in the contour.
Contour Line: Assign the boundary line color of the contour
Element Edge: Assign the color of element edges while displaying the contour Contour Options: Specify options for contour representation
Contour Fill
Gradient Fill: Display color gradient (shading) in the contour.
Draw Contour Line Only
Mono line: Display the boundaries of the contour in a mono color.
Contour Annotation
Spacing: Specify the spacing of the legend or annotation.
Coarse Contour (faster) (for large plate or solid model)
Extrude The option is not concurrently applicable with the Deformed Shape option. Similarly, the option cannot be concurrently applied to the cases where the Hidden option is used to display plate element thicknesses or the Both option is used to represent Top & Bottom member forces (stresses). |
Legend |
Display various references related to analysis results to the right or left of the working window. |
|
Legend Position: Position of the legend in the display window
Rank Value Type: Specify a type of values in the Legend and the number of decimal points. |
3D Contour |
Display the reaction influence surface in a 3-dimensional contour. |
|
Scale Factor: Enter the drawing scale factor for the 3-D contour.
Draw vertical lines: Display vertical lines inside the 3-D contour. |
Values |
Display the reaction influence surface in numerical values. The font and color of the numbers can be controlled in |
|
Decimal Points: Assign decimal points for the displayed numbers. Min & Max: Display the maximum, minimum values. Set Orientation: Display orientation of numerical values.
Note |
: Save the results displayed in the current model window as a text file