Dynamic Nodal Loads

 

 

 

Apply time forcing functions to specific nodes.

 

 

 

From the Main Menu select Load > Seismic > Time History Analysis Data > Dynamic Nodal Loads.

 

 

 

Load Case Name

 

Select a time history analysis load case entered in "Time History Load Cases". Click to define the relevant function if the load case has not been previously defined.

 

 

Options

 

Add: To add to previously entered time forcing functions at specific nodes.

 

Replace: To replace previously entered time forcing functions at specific nodes.

 

Delete: To delete previously entered time forcing functions at specific nodes.

 

 

Function and Direction

 

Specify the time forcing function, loading direction and arrival time.

 

Function Name: Select a time forcing function defined in "Time Forcing Functions".Only Force or Moment type functions can be selected.

 

Load Type: Type of the selected time history forcing function

 

Direction: Select the loading direction of the time forcing function.

 

X: GCS X-direction

 

Y: GCS Y-direction

 

Z: GCS Z-direction

 

Arrival Time: "Delay" time for the time forcing function. Enter the delay time when the time forcing function is applied some time after the time history analysis is initiated. For the time history analysis due to vehicle loads, adjust the Arrival Time at each node to consider the effect of moving loads.

 

Scale Factor: Scale factor for the time forcing function

After defining the above items, select the nodes to be loaded and click to apply the time forcing function to the nodes. Use "Display" to check the data entry.