Design Parameter Detail Table

Query design parameters entered for strength verification or design of Frame Type Elements in tables.

"Select" the desired elements first and access the function.

From the Main Menu select Query > Detail Table > Design Parameter Detail Table.

Click the tabs at the bottom of the table window, which are classified by types, to display the desired information table.

The table types are as follows:

Elem: Element type, material property, section, Beta Angle, connecting nodes, etc.

Leng: Laterally unbraced and braced lengths

K: Effective buckling length factors

M_mag: Moment magnification factors

L_rdu: Live load reduction factor

Cb: Bending coefficient

Cm: Moment factors

Cv: Shear coefficient

Sig_allow: Allowable stresses

Ltsr: Limiting slenderness ratio

M_type: Member type