Forces/Moments Table

Check the member forces of wall elements from the analysis results in a spreadsheet format table.

Table Tool in midas Gen offers a variety of powerful built-in functions. Refer to the following items for detail directions:

Usage of Table Tool

Terminology

Familiarize with Usage

Basic directions (Cell motion, selection, size control, etc.)

Data manipulation (Add, delete, modify data, etc.)

Copy/Paste data using clipboard

Supplementary Table functions

Table Sorting

Table format setting

Auto-fit column width

Graph printing

Supplementary functions by Table types

Node/Element Table

Results Table

From the Main Menu select Results > Tables > Result Tables > Wall > Forces/Moments.

 (Refer to "Wall Forces/Moments")

Upon executing the Wall > Force & Stress Table function, Records Activation Dialog prompts. Click after selecting the output entities such as nodes or elements, loading conditions, construction stages, etc.

Note
Refer to Results Table of "Usage of Table Tool" for the usage of Records Activation Dialog.

Refer to Usage of Table Tool and check the following data:

Story: Story name

Level: Story Elevation

Wall: Wall (combination) number

Load: Unit load case/combination

Stage: Construction stage

Step: Sub-stage

Part: Position of wall element's internal force (Top End and Bottom End)

Axial: Axial force in the element's local x-direction

Shear-y: Shear force in the element's local y-direction

Shear-z: Shear force in the element's local z-direction

Torsion: Torsional moment about the element's local x-axis

Moment-y: Bending moment about the element's local y-axis

Moment-z: Bending moment about the element's local z-axis

Note
The Stage and Step columns in the Analysis Result Table are produced for a construction stage analysis or Hydration Heat Analysis. The Step column is produced also for a geometric nonlinear analysis.