Surface | ||||||
|
| ||||||
|
| ||||||
|
Create Surface from an enclosed area by selecting curves enclosing the area. After creating Surface, Ground Material Properties can be assigned and 2D mesh can be generated. As a Surface is composed of curves, Loads/Boundaries can be assigned to the outer curves of the Surface. Applicable Modules:
| ||||||
|
| ||||||
|
| ||||||
|
| ||||||
|
From the Main Menu,
select Geometry
> Create > Surface From the Command Line, type 'Surface' or 'S' | ||||||
|
| ||||||
|
| ||||||
Select Objects: Select all the curves to create a Surface and then press Enter or Space Bar Key.
Note: An open enclosure by the selected curves is considered to be closed if the separation is within the tolerance.
| ||||||
|
|
