Geometry
Split Revolved Faces : Insert angle to divide the curved section created by various options such as Extrude, Revolve etc. For example, if cylindrical shape is created by using Extrude function on circle, it will be divided into 4 sections if the 90¨¬ is applies to Split Revolved Faces.
![](../image/Global_Settings-03.png)
Automatic Generation of Release
Define whether to create connection condition automatically as members are created.
Pinned-Pinned : Create pin connection condition at each end when members are created.
Fixed-Fixed : Connection condition is not created with members.
Sketch
Create Dimension : Check if fixed dimension is to be applied when the line is drawn in sketch mode.
Create Constraint : Check if various constraint conditions like fix, orthogonal, parallel etc are to be applied when the line is drawn in sketch mode.
Copy Option
Choose whether to copy members with various conditions such as load, boundary condition & mass, shape offset etc.
Copy Loads : Choose whether to copy members by considering or disregarding various informations. (e.g Point Load, Beam Load, Pressure, Arbitrary Point Load, Arbitrary Line Load, Arbitrary Pressure, Temperature, Displacement, Fire Proofing)
Copy Boundaries & Masses : Choose whether to copy members by considering or disregarding various informations. (e.g Support, Point Spring, Area Spring, General Spring, Beam End Offset, Rigid Zone, Beam End Release, Plate End Release, Mass, General Mass)
Copy Shape Offsets : Choose whether to copy members by considering or disregarding various informations. (e.g Section Offset, Start Offset, End Offset).
|