 Output
Type Selection
Step:
Total pushover analysis results with maximum/minimum values
Maximum
& Minimum: Maximum/minimum values only
Output Step
Specify the step range and
interval for the pushover analysis results which are to
be produced.
Node Selection
Select an entity for which
the pushover analysis results which will be produced.
User
Input: Enter the node numbers.
Selected
Nodes in View: Use the selected nodes
in the model window.
Reference Point
Select a reference point
for displacement when Node Result is selected.
Ground:
Select the ground as the reference point.
Another
Node: Select another node as the reference point.
Pushover Load Case
Select
a pushover load case for the pushover analysis results
which are to be produced. |