Repair: Break Face-Edge

Function

Break Face-Edge divides edges of existing faces.

Call

Geometry > Repair > Break Face Edge

Method

Ratio

Edges are divided by a length ratio.

Select Target Shape

Select a  face (Face, Shell, Solid) on which the Break Face-Edge operation will be executed.

Select Edge(s)

Select edges to be divided.  Only the edges of the selected object can be selected.

Cutting Ratio

Enter a cutting ratio.

Breaking Points

Edges are divided by specifying Breaking Points on edges.

Select Target Shape

Select a  face (Face, Shell, Solid) on which the Break Face-Edge operation will be executed.

Select Edge(s)

Select edges to be divided.  Only the edges of the selected object can be selected.

Select Breaking Vertex(s)

Select vertices, which will become basis for dividing edges.  The selected vertices will be projected onto the edges in the shortest paths, and the edges will be divided at the projection points.

<Break Face-Edge>

Breaking Edges

Edges are divided by selecting intersecting edge(s).

Select Target Shape

Select a  face (Face, Shell, Solid) on which the Break Face-Edge operation will be executed.

Select Edge(s)

Select edges to be divided.  Only the edges of the selected object can be selected.

Select Breaking Edge(s)

Select edges, which will be used for dividing edges.  The selected edges will be projected onto the edges to be divided in the shortest paths, and the edges will be divided at the projection points.