Mesh Control: Along Edge

 

 

 

 

Function

Edge Mesh Control allows us to define the properties of elements, which will be applied to selected edges in advance.

 

 

 

 

Call

Mesh > Mesh Control > Along Edge

 

 

 

 

<Edge Mesh Control>

Select Edge(s)

Select edges, which will be assigned a mesh control.
 

Attribute

 

Name

Enter a name for the Edge Mesh Control.
 

 

 

 

 

Notes

 

Once a Mesh Control is assigned to a shape, the Mesh Control and the shape are interconnected.  Since a shape with a Mesh Control can not be modified, a copy is made, which is then modified.  Such interconnection can not be released by Freeze unlike other cross-references linked in the process of modeling.  The Mesh Control must be deleted in the Works Tree.  It is therefore recommended that a Mesh Control be assigned at the last stage in a modeling process.

A mesh control, which has been created, is located under Mesh Control of Mesh in the Works Tree.  It can be either edited or deleted by a right click on each entity.  The assigned properties will continue to take effect until the Mesh Control is either edited or deleted in the Works Tree.