Design Code

Define the design code and strength reduction factors, which will be applied to the calculation of interaction curve.

From the Main Menu select Option > Design Code.

Click Design Code in the Icon Menu.

Design Code dialog box

Design Code

Select a desired design code.

Partial Safety Factor

Gamma c: Partial factor for concrete. The recommended values for 'persistent & transient' design situation is "1.5".

Gamma s: Partial factor for reinforcing steel. The recommended values for 'persistent & transient' design situation is "1.15".

Alpha cc: Coefficient taking account of long term effects on the compressive strength  and of unfavorable effects resulting from the way the load is applied. The value of Alpha_cc for use in a country should lie between "0.8" and "1.0". The recommended value is "1.0".