Directly
input the start position(Anchor head node position) or
click from the work screen.
The
anchor installation direction can be specified using [Angle,Length],
[Relative dx, dy] or [Absolute x, y].
[Angle,Length]
: Input the length and angle from the point entered in
the previous stage. The angle is the rotation angle in
the counterclockwise direction relative to the x axis
of the workplane.
[Relative
(dx, dy)] : Input the relative distance from the point
entered in the previous stage as 2D coordinates on the
workplane.
[Absolute
(x,y)] : Input the absolute 2D coordinate value in the
workplane.
The
anchor length can be classified as an ungrouted length
or a grouted length. The ungrouted length always creates
1 element using the seed method and setting the ‘number
of divisions’ as 1. The grouted length creates elements
with a unit length using the seed method and setting the
‘length spacing’ as 1.
Prestress
is the initial prestressing force of the anchor. A (+)
value represents tension and A (-) value represents compression.
Checking
the [Pretension Type] option does not create axial force
loss in the a load activated construction stage. The created
prestress can be registered by specifying the load set
name.
Mesh set
Register
the created anchor on the mesh set. The user can specify
the name of the mesh set. |
The Anchor Modeling
Wizard creates a simple anchor model.
