Shear Coefficient (Cv) |
|
|
|
|
|
Use this function to enter the Shear Coefficient (Cv) required to calculate the design shear strength or the allowable shear stress due to the shear force in I and C sections in the strong axis direction (z-direction). |
|
|
|
|
|
|
|
From the Main Menu select Design > Steel Design > Shear Coefficient (Cv). |
|
|
|
|
|
First, select the members in the model and enter the following : OptionSelect Add/Replace or Delete. Add/Replace: Add the newly entered value or replace the previously entered value. Delete: Delete the entered value. Data entry is not required when deleting.
: Apply the entered value to the selected members. : Close the entry Dialog Bar. Note 1 Note 2 Access the data table following the procedure below. From the Main Menu select Design > Steel Design Parameter > Steel Design Tables > Shear Coefficient (Cv). From the Tables tab of the Tree Menu select Design Tables > Steel Design Table > Shear Coefficient (Cv). |
|
|