Design Parameter Detail Table

• Function

Query design parameters entered for strength verification or design of Frame Type Elements in tables.

"Select" the desired elements first and access the function.

• Call

From the Main Menu select Query > Design Parameter Detail Table.

Select Query > Design Parameter Detail Table from the Tables tab of the Tree Menu.

Click Design Parameter Detail Tables in the Icon Menu.

• Usage

Click the tabs at the bottom of the table window, which are classified by types, to display the desired information table.

The table types are as follows:

Elem: Element type, material property, section, Beta Angle, connecting nodes, etc.

Leng: Laterally unbraced and braced lengths

K: Effective buckling length factors

M_mag: Moment magnification factors

L_rdu: Live load reduction factor

Cb: Bending coefficient

Cm: Moment factors

Cv: Shear coefficient

Sig_allow: Allowable stresses

Ltsr: Limiting slenderness ratio

M_type: Member type