Shear Coefficient (Cv)
| ||
| ||
| ||
Use this function to enter the Shear Coefficient (Cv) required to calculate the design shear strength or the allowable shear stress due to the shear force in I and C sections in the strong axis direction (z-direction). | ||
| ||
| ||
| ||
From the Main Menu select Design > Steel Design Parameter > Shear Coefficient (Cv).
From the Menu tab of the Tree Menu select Design > Steel Design Parameter > Shear Coefficient (Cv). | ||
| ||
| ||
First, select the members in the model and enter the following :
Option
Select Add/Replace or Delete.
Add/Replace: Add the newly entered value or replace the previously entered value.
Delete: Delete the entered value. Data entry is not required when deleting.
: Apply the entered value to the selected members.
: Close the entry Dialog Bar.
Note
1
Note
2
Access the data table following the procedure below.
From the Main Menu select Design > Steel Design Parameter > Steel Design Tables > Shear Coefficient (Cv). From the Tables tab of the Tree Menu select Design Tables > Steel Design Table > Shear Coefficient (Cv).
| ||
|