Load Set
Automatically registers an entered load as a Load Set.
It is not necessary to separately enter the Load Set name when creating a load. The load name will become the name of the Load Set.
Applicable Modules:
Ground |
Slope |
Soft Ground |
Foundation |
Seepage |
Dynamic |
From the Command Line, type 'LoadSet' or 'LS'
From the Works Tree, invoke Context Menu
Load Set
Create or Modify Load Sets.
Name
Load Sets previously created are displayed. Click the name to change.
Type
Select a load type among the available types
Symbol |
Description |
-- |
User |
DL |
Self Weight |
RL |
Rock Load |
EV |
Vertical Earth Pressure |
EH |
Horizontal Earth Pressure |
WP |
Ground Water Pressure |
SH |
Shrinkage |
T+ |
Temperature |
T- |
Temperature |
TPG+ |
Temperature Gradient |
TPG- |
Temperature Gradient |
E |
Earthquake |
EI |
Seismic Inertial Stress |
ES |
Seismic Shear Stress |
Create Combined Load
Set
Click to create Combined Load Sets.
Create Multiple Load Sets
Create Multiple Load Sets having certain regularity.
Name
Enter name of the Load Sets.
Start
Start number of the Multiple Load Sets, which will be appended to the main name.
No. of Sets
Number of Load Sets to be created.
After creating the multiple Load Sets, the dialog box will close upon clicking. Click the ESC key to close the dialog box.
Click the ESC key to close the dialog box.